
Linear lighting system – LineaLED
Linear lighting system – LineaLED

Linear LED luminaire from LEDCO s.r.o. is an energy-efficient replacement for linear fluorescent lighting systems for versatile use in industry or commercial and administrative premises. It is suitable as a more economical alternative to conventional lighting systems, as well as an ideal solution for new lighting installations.
It is characterized by excellent light parameters, which is a consequence of the use of the most modern LED light sources. The entire system includes electrical wiring, power or emergency power supplies, and LED modules with variable optics. You do not need to pull the wiring for each lamp separately, everything is part of a linear system. Of course, there is also the possibility of multi-phase switching, dimming using the DALI protocol or emergency lighting with distributed or central backup sources. There are several lighting characteristics of the luminaires provided by the clipping optical modules. The system thus opens up a wide range of applications for the designer for various types of illuminated spaces (shelving, corridors, aisles, production premises, sales and office premises, and many others). The developers took care of the sophisticated design of the system, which ensures excellent serviceability in the event of a failure or modification of the system. The authorized person can easily install and replace the modules without unnecessary tools.
Advantages
- Cost-effective solution for line lighting in industry, commercial and other spaces
- Excellent quality light with high light output to satisfy various requirements
- Long service life and service interval
- Easy installation, modification and serviceability
- Flexible solution
Usage
Commercial premises, industrial halls, warehouses, offices, and others
Luminaire

The continuous line of LED lighting consists of two components, a supporting profile and a LED lamp. The system creates an uninterrupted light band without visible dark spots and various reflectors. Individual types of light characteristics are provided by different optical modules.
LED luminaires and supporting profiles are available in the following lengths and inputs:
- 595mm 16W / 26W / 32W
- 1478mm 45W / 65W / 80W

The LED chips used in the luminaire have a color rendering index Ra> 80 and are available in chromaticity color temperatures :
- 3000K
- 4000K
- 6000K.
The luminaires have a low UGR glare factor and meet all environmental requirements and guidelines for energy-efficient buildings.
Optics

Wide selection of optics from sharp to wide radiation characteristics, as well as asymmetric optics.
By replacing the diffuser, the appropriate radiation characteristics of the luminaire are adjusted.
- Sharp angle of beaming – 20°
- Narrow angle of beaming – 50°
- Wide angle of beaming – 90°
- Flat angle of beaming – 120° a 160°
- Asymmetric beaming
- Asymmetric beaming on both sides



Supporting profile
Standard 3-phase installation in the profile.
The supporting profile can lubricate a 5, 7 or 11 conductor installation using conductors with a cross section of 2.5 mm2.
The maximum current load is 16A, enabling 44 pcs of 150 cm modules with a power input of 80 W in one series.
Separate power supplies with the possibility of integrating an emergency power supply.
Electrical connection at the end or in the middle of the line system via the power supply module.
The profiles are equipped with interconnecting mechanical and electrical connectors.
Flexible connecting cables at the beginning and end of the profile.
Large distance between hinges up to 3.5m using a self-supporting connection module.
Installation
3m spacing of suspension ropes allow faster and easier installation with a smaller number of suspension points.

- chain
- rope
- rod
- attached
- recessed
Connecting components
Corner connectors expand the possibilities of connecting individual lines with L, T and X shapes. Each corner connector contains input and output connectors for easy connection of lines without any tools or cabling.

- L-shaped coupling
- T-shaped coupling
- X-shaped coupling
An example of using all 3 types of corner connectors

Emergency lighting function

The system can operate on normal power and switch to emergency mode in the event of a power failure to maintain a safe level of lighting for emergencies and evacuation.
Various battery modules and two independent circuits installed in a support profile for central emergency power supplies are available.
Possibility to use emergency power supply system with central battery / generator EL1 EN1 and EL2 EN2. In this case, the selected luminaires are powered by the respective line (2 separate lines) at 100% power.
Or an integrated battery in the luminaire module, in which the luminaire consumes 6W or 12W with a lighting time of 1.5h or 3h (depending on the requirement). Charging time is 24 hours as standard.
A 5W LED spotlight module with a profile length of 600m and the possibility of rotating for use as an emergency lamp is also available.

DALI and 1-10V dimming system
Effective lighting control tools are the basis for ensuring high-quality lighting of rooms in conjunction with reducing energy costs. The correct choice of lighting management depends on the specific conditions of the building and the purpose for which the lighting spaces are used.
Using a suitable lighting control system and a sufficient number of sensors, your lighting system will save you money and the environment and not draw your bills.
With the DALI pacing system, you can install adequate motion and light intensity sensors in the line system without any additional installation. The profile system can have a DALI line routed directly in the support profile, thus avoiding the need for additional cabling and mounting of sensors.
There are available 4 types of dimming:
- DALI dimming
- 1-10V dimming
- PWM dimming
- button dimming